SH2000
82.150 Rev 100315
31
7.3 Change Heater Module
IMPORTANT:
BEFORE UNDERTAKING ANY MAINTENANCE PROCEDURE,
MACHINE MUST BE ISOLATED FROM MAINS SUPPLY.
If machine is fitted with bag top support belts, it may be necessary to
remove these first.
7.3.1
Remove rear cover.
7.3.2
Disconnect the heater plugs. (1)
7.3.3
Remove Bag Guides if fitted (see Section 6.15).
7.3.4
Detach and remove thermocouple (2) – if tight, lever with small screwdriver.
7.3.5
Detach earthing braid from capsule. (3)
7.3.6
Release Heating Assembly fasteners (1/4 turn) from underside of bottom plates.
7.3.7
Lift out the complete assembly, shake slightly to release the bottom fasteners.
7.3.8
Reassemble in reverse order. Make sure the flexible duct (4) is attached correctly
to the red tube.
7.3.9
Bottom fasteners may require initial turning to allow the assembly to bed down.
Once in place, a clockwise 1/4 turn will lock them.
7.3.10 If Capsules or Thermocouples have been replaced, run Autotune (see Section
6.6
)
NOTE
MAINTENANCE
1
2
4
3
Содержание Saxon SH 2000
