FISCHBEIN PBC-6000, Руководство оператора, Страница: 8 / 82

FISCHBEIN
®
Co. MODEL PBC-6000™
OPERATOR’S MANUAL
REV. D 2005-03 8
Air Consumption Minimum Requirement: 420 SCFH (11,9 SCMH)
Air Pressure Requirement: 90 PSI (6,2 bar) (with ½ inch air line)
Swing Channel Design: The PBC 6000 is designed with a front breakaway channel,
which swings outward. This allows quick access into the
machine for safety, to clear bag jams, cleaning and maintenance.
Air Scrubber: Blows debris from the bag top that could otherwise prevent a good seal.
Caster Wheels: Two locking in the back and two standard wheels in the front.
Electrical Requirements: The following electrical information is in
accordance with provision 4.7.1 from NFPA 79 (National Fire
Protection Association) Electrical Standard for Industrial
Machinery, 1997 Edition:
TABLE 1
MODEL VOLTAGE PHASE HERTZ F.L.A. MAX. COMP. LOAD
PBC 6000 230 1 60 22 14
PBC 6000 230 3 60 19 14
PBC 6000 380 3 50 12 8
PBC 6000 460 3 60 10 7
PBC 6000 575 3 60 9 5.5
PERFORMANCE CHARACTERISTICS
System Speed Ranges:
(Range 1): Standard: 30-85 feet per min (9,1 – 25,9 meters per min)
(Range 2): Greater than 85 feet per minute (25,9 meters per minute)
(Range 3): Less than 30 feet per minute (9,1 meters per minute)
NOTE: Speeds above 85 FPM (25,9 MPM) are obtainable upon request, but are
dependent upon bag types; please consult the Fischbein representative to determine
the machine capabilities, given the closing requirements.
Fold Size Maximum:
1 7/8 inches (48mm)
Bag Jam Detector: A proximity switch that shuts the heaters off and swings open the
front channel in the event of a detected bag jam.
Bag Size Range (empty):
Width: Variable
Length: 56 inches (1422mm) maximum
Minimum Free Top: 6 inches (153mm) (standard fold minimum)
Overheat Sensor: Shuts down the heaters if the temperature rises above a set
maximum. Still allows air to flow through the hot air
manifold to cool the heaters and prevent any damage.