FISBA READYBeam, Техническая инструкция

Страница: 12 / 16

12
Appendix
Pin configuration and power values
Connector: Samtec SFSD-10-28G24.00SR
Enable Laser: low = 0V, high = 3.3V
Analog In: 0V … 3.3V --> 10% ...100% of Laser power
Power: +12V … + 24V max. 4A
Pin 1 is marked on the connector with arrow (not notch)
Pin 1 Analog In- Laser red
Pin 2 Analog In+ Laser red
Pin 3 Analog In- Laser green
Pin 4 Analog In+ Laser green
Pin 5 Analog In- Laser blue
Pin 6 Analog In+ Laser blue
Pin 7 Gnd
Pin 8 Enable Laser red
Pin 9 Enable Laser green
Pin 10 Enable Laser blue
Pin 11 RS 485 B
Pin 12 RS 485 A
Pin 13 Gnd
Pin 14 Gnd
Pin 15 Gnd
Pin 16 Gnd
Pin 17 Power +12V … +24V
Pin 18 Power +12V … +24V
Pin 19 Power +12V … +24V
Pin 20 Power +12V … +24V
Table 1