FISBA READYBeam, Техническая инструкция

Страница: 8 / 16

8
· Les équipements brillants et réfléchissants doivent être enlevés de la
zone laser ou recouverts de manière appropriée. Les fenêtres et les murs
réfléchissants doivent également être recouverts d’un matériau de faible
inflammabilité.
1.3 Warning and information labels
The following warning labels are fitted to laser and processing head:
VISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
λ [nm]
400 – 410
486 – 490
632 – 643
EN 60825-1:2014
max. power [nW]
210
55
155
VISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
λ
[nm]
440 – 460
515 – 530
625 – 664
EN 60825-1:2014
max. power [nW]
110
70
105
This product does not confirm to
21CFR 1040 and EN 60825-1,
it is intended to be integrated in
OEM equipment only.
Laser radiation.
Avoid direct exposure to Beam
400 – 700 nm
Max. 300 mW
Class 111b
laser product.
DANGER
1.4 Correct and specified use of the unit
It is forbidden to commission the laser system until it has been ensured that the
ma chine or plant in which the laser system has been fitted complies with the appli
-
cable safety regulations. The organisation operating the plant is solely liable for any
damage caused by incorrect use of the unit. The organisation operating the system is
respon sible for the correct conditions in relation to operation, maintenance and repair.
The only personnel to be tasked with operation, maintenance and repair are personnel
who have been adequately instructed in the function of the laser system and who
have also been instructed specifically on the dangers and risks of incorrect handling of
the system.