fisair CCE2.0, Инструкция по установке и эксплуатации

Страница: 40 / 62

MANUAL for the Stages Control Panel | CCE2.0
40
Object Description Writing range (increase) Factory
setting
SETPOINT µS*
(Analog_Output:9)=1012
Write conductivity
Set-Point
0-1999µS/cm*(increase
1µS/cm) 300 µS/cm
SET Timer 1*
(Analog_Output:1)=1030
Write Timer T01 30-1000s(increase 15s) 90s
SET Timer 2*
(Analog_Output:2)=1032
Write Timer T02 1-15 min(increase 1min) 5min
SET Timer 3*
(Analog_Output:3)=1034
Write Timer T03 1-60 min(increase 1min) 10min
SET Timer 4*
(Analog_Output:4)=1036
Write Timer T04 30-400min*(increase
30min) 60min
SET Timer 5*
(Analog_Output:5)=1038
Write Timer T05 0-24h(increase 1h) 0min=never
SET Timer 6*
(Analog_Output:6)=1040
Write Timer T06 0-24h(increase 1h) 1h
SET Timer 7*
(Analog_Output:7)=1042
Write Timer T07 5-360s(increase 5s) 30s
SET Timer 8*
(Analog_Output:8)=1044
Write Timer T08 10-60min*(increase 5min) 15min
* These objects are bidirectional: In addition to working as writing, they show the reading of their
states.
Read: The following table shows the read function of each communication objects:
Object Description Reading
PROBE GET µS
(Analog_Input:0)=2012
Read conductivity value 0-1999 µS/cm*
PROBE GET TEMP
(Analog_Input:1)= 2014
Read temperature value ºC Ej. 18
→
18,15ºC
MPCB V (Analog_Input:2)
=2020
Read analogue input of
signal 0-10 V (Range 0-
10) Ej. 8
→
8 V
MPCB mA (Analog_Input:3)
= 2022
Read analogue input of
signal 4-20 mA (Range 4-
20) Ej. 8
→
8 mA