FIS MPO 12, Руководство пользователя

Страница: 4 / 16

1
Fiber Instrument Sales, Inc. | 1.800.5000.FIS(347) | www.fiberinstrumentsales.com
Tour of Units
A) Male MPO test port: Insert a female MPO connector into the
power meter at all times.
B)
Screen Heading: Whichever section of the interface you are
currently in will be displayed here.
C)
Wave length tested: The current wavelength that the meter is
testing.
D)
Battery indicator: Displays remaining battery life - when
charging, indicator will flash.
E)
Unit display: By pressing left/right arrows, toggle between
dBm and dB units of measure.
F)
Fiber count: Displays the fiber number within the MPO cable.
G) Power value: Displays the power value for each corresponding
fiber number within the MPO cable.
H)
Pass/Fail threshold value: This can be set in the options menu
under “pass/fail thresholds”.
I)
Auto-Off: This feature is activated as the default setting every
time the unit turns on. To de-activate it, short press the “on/off”
button and it will disappear. To re-activate, simply short press
“on/off” button again.
J)
F-Keys: These soft keys will perform multiple functions at any
given time in the unit. The command they perform will always
be displayed just above each key.
K)
Arrow Keys: These keys typically will allow the user move
cursors and to make specific selections within the unit.
L)
On/Off: This button powers the unit on and off. To turn on or
off, long press this button for 3 seconds.
M)
Zero/Test: This button has two functions. It will reference out
the power value of the reference cord and also test for polarity.
N)
Mini-USB port: Insert the USB data cable to the unit here and
then connect to your PC to transfer data into the reporting
software.