14
Cold/Hot Start Mode
Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor.
It allows you to configure your timer start feature to check the vehicle’s temperature prior to starting. All
of these options require programming from your local dealer.
Anti Jacking Mode
Your system has a mode that requires you to keep your remote separate from your key chain. This
feature also requires additional labor. Please consult your installer for more details. The Anti Jacking
mode allows you to safely disable your vehicle once a thief has driven off with your property. If you are
car jacked and still have your remote, you can panic the system by holding the Lock button down for 4
seconds. The siren will sound for 30 seconds and the vehicle will shut down.
More Optional Sensors
If you purchased an Alarm or Alarm and Remote Start system, you can add additional sensors from
Firstech. Protect your investment by adding a battery back up system to protect main power or a FT-DAS
sensor to protect custom wheels and tires.
Remote Coding / Programming Routine
IMPORTANT:
Every Firstech remote must be coded to the system prior to performing any operations. All
remotes must be coded at the same time.
Programming 2 Way 4 Button Remotes:
STEP 1:
Activate Valet/Programming mode by manually turning the ignition key
on
and
off
(between the
Acc & On positions) five times within 10 seconds. The vehicle’s parking lights will flash once with the
successful completion of this step.
STEP 2:
Within 2 seconds after cycling the ignition for the 5
th
time, tap the button on ANT-2WFMX or
ANT-1WFMX for a half second. The Red LED on the Antenna will turn on.
STEP 3:
Tap the Lock button on the 1
st
remote for a half second. The Green LED on the Antenna will
flash 1 time. The parking lights will also flash once to confirm the remote has been programmed. Repeat
this step for additional remotes.
Exiting Programming:
Programming is a timed sequence. The parking
lights will flash twice signaling the end of programming mode.
Programming Multiple Remotes:
Code additional remotes by
pressing the Lock button on
2 way remotes
or the Lock button on
1
way remotes
. The parking lights will flash once confirming each
additional remote. All compatible systems can recognize up to 4
remotes.
