First Degree Fitness VX-3 Fluid rower, Руководство пользователя

Страница: 5 / 24

5
Left Seat Rail
This portion of the assembly requires the Mainframe, 1x Left/1x Right Seat Rail, 2x M10x80mm
Bolt, 4x M10 Nylock nut.
*Note: 2x M10x80mm bolt/spacer are pre-installed on the Seat Rails for your convenience.
Right Seat Rail
Left Seat Rail
M10x80mm Bolts, *2x, 4x M10 washers
and 4x Nylock nuts
.
Begin with Left Seat Rail. Align using the
pre-installed M10x80mm bolt as shown.
Secure from behind with M10 Nylock nut.
Step 3: Attaching Seat Rails to Frame
Right Seat Rail
Bungee Pulley
Bungee Shock Cord
Before installation of the Right Seat Rail, thread the
Bungee Shock Cord through the top of the Seat Rail,
around the Bungee Pulley and out the bottom as shown.
Once this is complete, repeat the same assembly
procedure as used on the Left Seat Rail.
Seat Rail Attachment
Points
Align and secure lower attachment points using
M10x80mm bolt, M10 Nylock nut and M10
washers.
Left Seat Rail
Next, install lower left
Seat Rail.
M10x80mm bolt, Ny-
lock nut and M10
washers.