First Degree Fitness VX-3 Fluid rower, Руководство пользователя

Страница: 17 / 24

17
Step 3:
Loosen both the rear and front
tank bolts slightly as shown left. Remove
front Rubber Belt Cover.
Step 4:
Using a 6mm Allen Key, tighten
the Belt using the Tank Tensioning Bolt
until the belt no longer slips during hard
rowing.
Note: Do not over tighten tank bolts.
Tank Belt Adjustment
Step 2
End Cap
Step 4
Tank Tensioning Bolt
Tip: Twist the belt by hand to gauge
tightness. Correct tension should be ob-
tained when no longer able to twist more
than 60 degrees.
Step 3
Step 1
Step 1: Remove large metal in-
spection plate as shown above.
Step 2:
Using a long tool, push
out the rear end cap as pictured
below left. This will give you ac-
cess to the tank tensioning bolt
(shown lower right).