First Degree Fitness Fluid FR-E316, Руководство пользователя

Страница: 14 / 32

14
Assembly Instructions – FR-316
STEP 6
Installing S-Bend and Frame Tensioning Bolt —FR-E316 / S6
a)
Carefully lower the rower to its normal operating
position to complete assembly with S-Bend
installation and Frame Tensioning Bolt.
Install rear of S-Bend[8] onto the Upper Frame
using M10x80mm Bolt[11], M10 Nyloc Nut[17]
and 2x M10 Washers[16].
b)
Tilt Upper Frame slightly forward and secure
front of S-Bend to Footplate using M10x15mm
Bolt and M10 Washer.
(Note: M10x15mm Bolt and M10 Washer are
pre-
installed on the S-Bend for your convenience)
c)
Install the Frame Tensioning Bolt and tighten as
far as it can go. This will pretension the frame to
the proper position and complete the assembly.
c)
b)
a)
REQUIRED
S-Bend [8]
M10x80mm Bolt [11]
2 x M10 Washers [16]
M10 Nyloc Nut [17]
M10x80mm Bolt
M10 Washer
a)
M10 Nyloc Nut
M10 Washer
b)
M10x15mm
Bolt
c)