15
M10x140mm Bolt
M10 Curved Washer
Assembly Instructions - VX-2
STEP 1
Attaching Upper/Lower Frame—VX-2
CAUTION
The Curved Washers can
damage paint if not lying
flush against oval tube when
tightened. Use care when
securing.
a) Open box and remove contents. Lie Upper Frame[1] on
it’s back as shown here. In the bolt pack, locate
2 x M10x140mm Bolts[15] and M10 Curved Washers[21]
along with M10x65mm Bolt[13] and M10 Washer[20].
Connect the Lower Frame[3] to Upper using M10x140mm
Bolts first and do not tighten before installing the third
M10x65mm Bolt as shown lower right
.
b) 2 x M10x140mm Bolts[15] and 2 x M10 Curved Washers
[21]. Do not tighten.
2
1
12
REQUIRED
Upper Mainframe [1]
Lower Frame [3]
M10x65mm Bolt [13]
2 x M10x140 Bolts [15]
M10 Washer [20]
2 x M10 Curved
Washers [21]
Upper Frame
CAUTION
Align the Curved Washer with
curvature of frame for a flush
fit and to avoid scratching.
c) M10x65mm Bolt[13] and M10 Washer[20] Tighten all
three bolts.
WARNING
Do not attempt to stand
rower until Footplate/Seat
Rail assembly is attached.
See following page for
details.
M10x65mm Bolt
M10 Washer
Lower Frame
CAUTION
Содержание Fluid FR-E316
Страница 1: ...USER GUIDE FR 316 VX 2 ...