12
Assembly Instructions
STEP 4
Assemble Rower Seat
a) Install the Rower Seat onto the Rower Frame using
4 x M6x20mm Bolts[11] and 4 x M6 Washers[16].
9
3
6
b) Slide the assembled Seat Rails[2] facing in the direction of
the arrow in the above graphic. The Seat indentation must
be towards the rear of the Rower.
REQUIRED
Rower Seat
4 x M6x20mm Bolts [11]
4 x M6 Washers [16]
Note: Finished Rower Seat must be mounted exactly as shown,
resembling shape of the letter ‘Z’.
CAUTION
The Rower Seat[6] is heavy.
Use both hands and keep
Ringers clear of the Rower
channels when guiding the
Seat down the Seat Rails.
Rower Seat
Rower Seat Frame
M6 Washer
M6x20mm Bolt
Indentation
