24
Replacing the Rower Bungee Shock Cord
6. Move the Rowing Handle from the
S-Bend to a point where it is resting
on top of the Tank. This helps line up
the Bungee Cord hole for easier
removal/replacement. Detach Bungee
Cord from lower rear attachment
point.
5
.
After removing the Magnetic Ring
and the C-Clip, the Bungee Cord will
be accessible. Remove the Belt/Bungee
Pulley off the Shaft, pull the Bungee
Cord through the Belt/Bungee Pulley
and
remove. Thread new Bungee Cord
through and pull until knotted end is
held securely in the slot.
Caution: Do not loosen the Belt.
Re-Wrapping
7. Lower left front to upper left front
Pulley.
Hint: Keep a slight tension on the
Bungee Cord when threading through
the
Bungee
Pulleys.
8. Upper left front to lower middle left and
right Pulleys.
Remove
Replace
C Clip
9. Middle right Pulley to upper right Pulley.
