OPERATION
Citizen gas 6 and 9
19
7.5 FLAME CONTROL
Electronic flame control is enabled at the start of the burner ignition cycle
once the thermostatic control activates (red LED on) and the
switch is
ON.
Once the flame is stable, the control disables ignition and enables the
solenoid valve only if the minimum/maximum switch
is set to maximum.
In this case, from stable the flame reaches maximum intensity.
7.6 MINIMUM/MAXIMUM SWITCH
The
switch serves to selector flame intensity. Position “I”
corresponds to minimum intensity, and position “II” to maximum. The green
light
indicates operation at minimum intensity, and the yellow light
indicates maximum intensity.
7.7ACCIDENTAL FLAME-OUT
If the flame goes out during normal operation (for example, due to gas
supply failure) the electronic control closes the solenoid valves and repeats
the entire ignition cycle.
