INSTALLATION
Citizen gas 6 and 9
12
5. INSTALLATION
5.1 PLACE OF INSTALLATION
Efficient, safe and long operation of the machine also depends on the
place chosen for its installation, so it advisable to carefully evaluate where to
install it before it is delivered.
It should be installed in a dry place that is easily accessible for use,
cleaning and maintenance. The area surrounding the oven must be kept free
of obstructions. In particular, cooling and gas burner air intakes must not be
covered under any circumstances.
The oven must in any case be installed no less than 20 cm from walls or
other equipment.
Since it is a gas appliance, the place of installation must be adequately
ventilated.
There must be an aperture connected directly to the outside at floor level,
with a cross-sectional area of at least 6 cm
2
for each kW of max. power
developed by the burner, with a minimum of 100 cm
2
.
Lastly, you should check that the temperature and relative humidity in
the place of installation never exceeds the minimum and maximum values
given in specifications (not even during operation of the oven itself or other
equipment present) (see paragraph 3.4). Temperatures and relative humidity
in excess of these values could lead to unpredictable and hazardous damage
to electrical systems.
5.1 GAS CONNECTION
Before making any connection, check that the type and pressure of the
gas for which the oven has been calibrated (indicated on the initial settings
label on the ID plate) corresponds to the type and pressure of the gas
supplied to your premises. If these do not correspond, refer to chapter 10 for
changing settings.
5.2 SUPPLY LINE
