Page 08
English
Customer Service: 1-844-FIRMAN1
Install
the
Wheel
Kit
The
wheel
kit
is
not
intended
for
over
-
the
-
road
use
.
Install the Support Leg
ASSEMBLY
A
B
C
The generator requires some assembly prior to
usage. If problems arise when assembling the
generator, call 1-844-347-6261.
1. Before adding wheels, tip the generator on
its side.
2. Slide the axle pin
A
through the wheel
B
.
3. Slide the axle pin
A
through the mount point
on the frame and flat washer
D
.
4. Secure the wheel and axle pin with the cotter
pin
C
.
5. Repeat steps 2-4 to attach another wheel.
3. Tip the generator slowly so that it rests on the
wheels and support leg.
4. Tighten bolt
E
and nut
F
with provide wrenches.
CAUTION
D
2. Attach the support leg (
G
) to the generator
frame with flange bolt (
E
) (M8X16) and flange
lock nut(
F
) (M8).
1. Attach the rubber support (
H
) to the support
leg (
G
) with flange bolt (
I
) (M6X25) and flange
lock nut(
J
) (M6).
