background image

 

14

NOTICE

When Fireye products are combined with equipment manufactured by others and/or integrated into systems
designed or manufactured by others, the Fireye warranty, as stated in its General Terms and Conditions of Sale,
pertains only to the Fireye products and not to any other equipment or to the combined system or its overall per-
formance.

WARRANTIES

FIREYE guarantees for 

one year from the date of installation or 18 months from date of manufacture 

of its prod-

ucts to replace, or, at its option, to repair any product or part thereof (except lamps and photocells) which is
found defective in material or workmanship or which otherwise fails to conform to the description of the prod-
uct on the face of its sales order. 

THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES AND

FIREYE MAKES NO WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED.

 Except as specifically stated in these general terms and conditions of sale, remedies

with respect to any product or part number manufactured or sold by Fireye shall be limited exclusively to the
right to replacement or repair as above provided. In no event shall Fireye be liable for consequential or special
damages of any nature that may arise in connection with such product or part.

FIREYE

YZEM-3001

3 Manchester Road

JUNE 2, 2017

Derry, New Hampshire 03038 USA

Supersedes April 3, 2013

www.fireye.com

Содержание YZ300















Отзывы: