Owners’ Instruction Manual – Tilting Bratt-Pan with electronic control “BETTERPAN – DBRG… - DBRE…”
12
In which:
80 °C = set product temperature
25 °C = temperature actually measured by the core probe
150 °C = set base temperature
25 °C = temperature actually measured by the base probe
Confirm by pressing
E N T E R
, then it will be necessary to confirm if we wish to start holding
cycle (65 °C) until the end of the cooking cycle.
If you select “YES”:
once the set product temperature has been reached, the appliance will stop heating and
start a holding cycle at 65 °C for an infinite time (shown on the display with 0).
Press
S T A R T
S T O P
to interrupt the holding cycle.
If you select “NO”:
once the set product temperature has been reached, the appliance will stop heating and
not carry out any holding cycle.
6.1.1. How to select cooking time with C-N probe
This type of cooking is related to temperature and not to time, however it is possible to set
a cooking time that will start countdown from the moment in which the selected product
temperature has been reached.
In this case, press
select desired time using
and confirm by pressing
E N T E R
Example
:
Product temperature 85°C
Bottom temperature 120°C
Cooking time 60 minutes
Holding = YES
During the heating cycle, the selected time appears only if the core temperature is
reached. Press
to view it for at least 20 sec.
Once the temperature of 85°C has been reached, it is
held for 60 minutes. Once the time is over, heating
stops and starts off again only to hold food at a
temperature of +65°C.
