FireRock 3620 Avenue C, Руководство по эксплуатации продукта

Страница: 117 / 124

117
FIREROCK
INSTALLATION
STEP THREE: THROAT
A piece of angled steel (2” x 2” x 1/4” thick) has been provided with your FireRock fireplace kit (30” - 48” only). The
length of this angled steel piece corresponds with the overall width of your firebox model. It should be installed across
the top of the firebox opening - angle up for maximum firebox opening, or angle down for additional “smoke lip.” For
60” and 72”, the angle iron (6” x 6” x 1/2” thick) must be purchased separately.
Begin building the throat by placing the angle iron in the desired position. Next, place the radius throat on top of the
angle iron and place the square throat back at the back of the firebox. Given the curvature of our lintel to aid in smoke
draw, you’ll want to keep a hand on this piece while placing the throat left and throat right pieces to secure it in place.
STEP 4: SETTING THE DAMPER
Upon setting the 4 throat components, a recess is formed for the purpose of locating the damper.
Each fireplace uses a different size damper.
30” firebox - 24” damper
36” firebox - 30” damper
42” firebox - 36” damper
48” firebox - 42” damper
STEP 5: SMOKE CHAMBER
The smoke chamber components can only be positioned one way. The fronts and backs are identical above the damper.
Be sure to check for and maintain plumb and level installation of these components. “Butter” all joints to give a smooth
appearance and ensure a leak-free joint.