Firepower MST 220i, Руководство по эксплуатации

Страница: 73 / 96

FIREPOWER MST 220i
Manual 0-5343 4-15 BASIC WELDING
E. Preheating
Suitable preheating of parts of the structure other
than the area to be welded can be sometimes used
to reduce distortion. Figure 4-32 shows a simple
application. By removing the heating source from
b and c as soon as welding is completed, the sec-
tions b and c will contract at a similar rate, thus
reducing distortion.
Art # A-07707
Figure 4-31: Principle of Presetting
Art # A-07708
B
Preheat Preheat
Dotted lines show effect if no preheat is used
Weld
C
Figure 4-32: Reduction of Distortion by Preheating
Art # A-07709
Figure 4-33: Examples of Distortion
Art # A-07710_AB
1
Block Sequence.
The spaces between the welds are
filled in when the welds are cool.
2
3
Figure 4-34: Welding Sequence
Art # A-07711_AB
4
3
2
1
Figure 4-35: Step back Sequence
Art # A-07428_AB
Figure 4-36: Chain Intermittent Welding
Art # A-07713_AB
Figure 4-37: Staggered Intermittent Welding