Firenzo Woodfires 102107, Инструкция по установке и эксплуатации

Страница: 16 / 31

Forte Flush & Athena Flush AG/RURAL - November 2018 16
5. PRE - INSTALLATION
(Refer diagram page 6)
In a Masonry Fireplace:
Before installing your Firenzo Insert it is important to check the condition of your masonry chimney.
Ensure any cracks are sealed, loose masonry repaired and the chimney swept. Check the
dimensions of your fireplace opening. Firebricks may need to be removed and the floor of the
opening should be level using mortar if necessary. Ensure any gaps between the chimney face and
fireplace surround are sealed with heat resistant material.
MANTEL – Masonry Fireplace
If the mantel shelf is of a combustible material there should be a minimum distance above the top of
the fascia of
400mm . This may be reduced if a deflector or heat shield is fitted under the mantel.
MANTEL – using ZERO CLEARANCE BOX - (Built - in Fire Canopy)
FORTE – Can NOT have a combustible mantel , however if the mantel is made of a non heat
sensitive material then the minimum distance above the top of the fascia must be 500mm .
ATHENA – The minimum distance above the top of the fascia to a combustible or
non - combustible mantel is 500mm .
SIDE SURROUNDS – MASONRY & ZERO CLEARANCE BOX - (Built - in Fire Canopy)
Clearance between the fascia and any wooden side surround must be 50mm providing the timber
protrudes no more than 100mm.