19
FGi.FPi.FXi
Issue
12 10/17
on it. If the paper is trapped then the seal is working. If the paper pulls out them
something is wrong and further examination is needed to find the cause.
7.9
Re-painting: All painted solid fuel stoves will require some re-painting from time
to time due to heat cycling, wear and tear and corrosion caused by moisture,
condensation or products of combustion and ash. The stove can simply be re-
painted by using stove spray paint or high temperature coatings after rubbing
down with wire wool or similar abrasive to remove all loose debris from the
surfaces.
7.10
Re-assembly: This is the reverse of the dismantling procedure – again taking
particular care not to drop the firebox liners onto the cast iron grate as re-
assembly takes place.