Firegear Key West KWB30 KWB-L1, Руководство пользователя, Страница: 20 / 36

20
Firegear Outdoor KWB30
INSTALLATION
OPTIONAL TWIG SET INSTALLATION
NOTE: KWB60 REQUIRES TWO TWIG SETS
Read the instructions below carefully and refer to the
images. If the twigs are broken do not use the unit until
they are replaced.
Broken twigs can interfere with pilot operation.
Improper positioning of the twigs may create carbon
build-up and can alter the unit's performance which is not
covered under warranty.
Twig kit # 326-930 contains the following pieces:
Description
Twig A
Twig B
Twig C
Twig D
Twig E
Twig F
Diagram 3
Diagram 2
Diagram 1
F
E
D
C
B
A
A
D
2) Install twig D on the burner as shown below. Orient the twig in the same way and in a similar location on the right side of the burner as
shown in Diagram 3.
1) Install twig A as shown below. Orient the twig in the same way and in a similar location on the right side of the burner as shown in Diagram 2.
3) Install twig E on the burner as shown below. Orient twig E across twig D in the same way and in a similar position as shown in Diagram 4.
Diagram 4
E
D