REV. A Page 11
FPB Pro Spur Burners Fire Pits with AWS System
INSTALLATION OF MEDIA INTO BURNER PAN
Install lava rock into the burner pan. Ensure the lava rock is
a minimum of 1-inch diameter for proper operation.
Note:
Do not pour Lava Rock directly from bag. It should
be placed naturally and NOT packed in tight. Loose fitting
is important to ensure robust flames. Placing the lava rock
in the pan by hand, ensures no excessive dust from bag
lays in the bottom of pan and potentially plugs the burner
port holes or the pan weep holes. DO NOT BLOCK
INJECTORS WITH MEDIA.
IF USING FIREGEAR OUTDOORS GL GLASS OR GLR
REFLECTIVE GLASS, ENSURE THE MEDIA DOES NOT
BLOCK THE INJECTOR HOLES.
IMPORTANT
:
DO NOT PLACE ROCK OVER TOP OR
UNDER THE PILOT SCREEN COVER.
The screen must
be free of any debris to ensure proper lighting of burner
and good flame sense (See Fig. 13).
Cover the burner completely with media but do not make
the depth greater than 1-inch over-top of the burner
port holes.
Do NOT cover the top of mesh pilot hood with any rock or
glass. It must be free an any debris to operate properly.
Mesh Pilot Hood
Media
Fig. 13
Media placement around pilot hood.
Acceptable media to be placed over top of the burner:
Lava Rock
Min.1”- 2” size
FG-LAVA-10 (10 LB)
FG-LAVA-40 (1 CUBIC FOOT)
GL Glass
Min.
½” - ¾”
size
Various colors are available
See Product catalog for details
Sold in 10LB jugs or 6 bags to a case
GRL Reflective Glass
Min.
½” - ¾”
size
Various colors are available
See Product catalog for details
Sold in 10LB jugs or 6 bags to a case
FINAL PREPARATIONS
MEDIA INSTALLATION
