FireClass FC410SNM, Быстрый старт

Страница: 3 / 12

FireClass FC410SNM
Fixing instructions Doc. version 4.0 3/12
ENGLISH
Technical specification
Battery Requirements
Recommended Wire Size
Addressable Device Conditions
– Normal
– Short Circuit wiring
fault
– Open Circuit wiring
fault
– Input Power fault
– Device Type invalid
– Device No Response
Notification Circuit
Electromagnetic compatibility
The FC410SNM complies with the following:
Product family standard EN50130-4 in respect of
Conducted Disturbances, Radiated Immunity,
Electrostatic Discharge, Fast Transients and
Slow High Energy; EN61000-6-3 for emissions.
Introduction
The FC410SNM Sounder Notification Module is
designed to provide an output, in response to a
command signalled from a controller, to activate
a number of polarised and suppressed sounders.
The sounders are powered from an independent
power supply and the module is capable of pas-
sing up to a maximum of 2A (eg, 24V dc 50mA
company sounders or a mixture of different
current rated sounders not exceeding a maxi-
mum current of 2A).
Features
A Power Supply Module supplies the source
power for FC410SNM dc applications:
 FC410SNM can switch up to 2A.
 FC410SNM supervises power supply.
 FC410SNM monitors the wiring to signalling
devices and will not switch on (even if com-
manded to do so), if a short circuit occurs.
This prevents a single short circuit condition
from disabling more than the output that
contains the short-circuit.
FC410SNM may be used in conjunction with an
FC410RIM in an Extinguishing Configuration. An
LED reports FC410SNM status to the user. The
LED lights when the FC410SNM has been com-
manded to activate.
Type Identification
Value 177
System
Compatibility Use only with
FireClass Fire Alarm
Controllers
Environment Indoor Application
only
Operating
Temperature -25 °C to +70°C
Storage
Temperature -40 °C to +80°C
Operating Humidity Up to 95% non
condensing
Dimensions
(W x H x D) 85 x 15 x 60 mm
Mounting
Requirements One FireClass
backbox
Standby current 0.75 mA
Alarm current 4.5 mA
Min.
1.5 mm
2
Max.
2.5 mm
2
Max. Circuit Voltage
Drop 3.0 V DC
Notification Circuit
EOL 27 Kohms, 0.5 watt
Output Current 2 A max @ 24 V DC