12
Part Number
18160, F, 06/29/2021
Installation
Installing the Mounting Base
•
Mounting Base should be installed vertically when installing CO Alarm on a wall.
•
Use appropriate length #6, Pan Head screws to secure Mounting Base.
•
Do not over-tighten.
•
Drill appropriate size hole
(0.38” (9.5mm) Max)
for wired models to accommodate the
wires.
If using a connector on the wires, a larger hole may be needed. Offset the hole
to the side of the Mounting Base with the wire slot, as shown.
Mounting Hole
2 PLCS.
Drill Location for wiring.
0.38” (9.5mm) Max
0.38”
(9.5mm) Max
Wire Slot
