Doc.-No.: 01/EHTD400
Equipment Handbook
Date: 01.03.2003
TD400
Revision:
Rev. date:
Page: 25 of 40
FIREBIRD, Am Tower 16, 54634 Bitburg
3.
Pull the stabilizers out, to the left and right, of
the canopy.
Reach inside the canopy, beyond the slider from
above, between the A and B lines, and flake the
fabric to the side.
4.
Do the same between the B and C lines. Re-
peat this process on the other side of the cano-
py.
5.
Follow the D lines on one side with your
hand, gently pull them out and place them to-
ward the center of the canopy, so that there‘s an
S-fold between the C and D lines.
Repeat this process on the other side.
Now grasp the steering lines on one side at the
edge of the canopy and pull them out with the
trailing edge. Lay the trailing edge (tail) in S-
folds in the center of the canopy. Repeat the
process on the other side.
Take care that all the lines stay in the middel of
the canopy. Avoid lineover-malfunktion, be care-
full!
