background image

1

2

safety

HealtH & safety InformatIon

tHIs ProduCt Has Been desIgned
to tHe folloWIng standards:

This equipment complies with the Low Voltage Directive
2006/95/eC & the eMC Directive 2004/108/eC.

emC - conformity  was  demonstrated  by  meeting  the                     
following standards:

eN 55014-1: 2006/a2: 2011: electromagnetic Compatibility - 
Requirements for Household appliances, electric Tools and 
Similar apparatus - Part 1: emission

eN 55014-2: 1997/a2: 2008: electromagnetic Compatibility 
- Requirements for Household appliances, electric Tools 
and Similar apparatus - Part 2: Immunity - Product Family 
Standard

eN 61000-3-2: 2009: electromagnetic Compatibility (eMC) 
Part 3-2: Limits - Limits for Harmonic Current emissions 
(equipment input current <16 a per phase)

eN 61000-3-3: 2008: electromagnetic Compatibility (eMC) 
Part 3-3: Limits - Limitation of Voltage Changes, Voltage 
Fluctuations  and  Flicker  in  Public  Low-voltage  Supply             
Systems (equipment with rated current <16 a per phase and 
not subject to conditional connection)

The installer should be aware of his/her responsibilities under 
the current, local Health and Safety at Work act. The interests 
of  safety  are  best  served  if  the  boiler  is  installed  and                  
commissioned by a competent, qualified engineer, OFTeC 
trained and registered. If not, a Building Notice is required in 
england & Wales. Other parts of the British Isles, including the 
Channel Islands, also require notification to building control.

Under the Consumer Protection act 1987 (UK), section 6 of 
the Health and Safety act 1974 (UK) and the Safety, Health 
and  Welfare  at  Work  act  2005  (ROI),  we  are  required  to           
provide information on substances hazardous to health.

InsulatIon and seals
Ceramic Fibre, alumino - Silicone Fibre material are used for 
boards, ropes and gaskets. Known hazards are that people 
may suffer reddening and itching of the skin. Fibre entering 
the eye will cause foreign body irritation. It may also cause 
irritation to the respiratory tract.

Precautions should be taken by people with a history of skin 
complaints  or  who  may  be  particularly  susceptible  to                  
irritation. High dust levels are only likely to arise following 
harsh abrasion. Suitable personal protective equipment 
should be worn where appropriate.

generally, normal handling and use will not give discomfort. 
Follow  good  hygiene  practices,  wash  hands  before                          
consuming food, drink or using the toilet.

First aid - medical attention should be sought following eye 
contact or prolonged reddening of the skin.

The small quantities of adhesives and sealants used in the 
product are cured. They present no known hazards when 
used in the manner for which they are intended.

safety

1.  Switch off all electrical and other ignition sources.
2.  Remove all contaminated clothing to safeguard against 

fire risk and skin damage. Wash affected skin thoroughly 

with soap and water and remove clothing to a safe well 

ventilated area and allow to air before cleaning.

3.  Contain and smother the spill using sand or other suitable 

oil absorbent media or non-combustible material.

4.  Do not allow fuel to escape into drains or water courses. 

If this happens, contact the relevant authorities in your 

area.

5.  Consult local authority about disposal of contaminated 

soil.

fuel sPIllage

fIrst aId

If fuel is accidentally swallowed:

* Seek medical attention immediately.

Do NOT induce vomiting.

If fuel is splashed into eyes:

* Wash out with running water for at least ten

minutes and seek medical attention.

safety -  conformity  was  demonstrated  by  meeting  the             
following standards:

eN60335-1: 2012: Household and Similar electrical appliances 
- Safety - Part 1: general Requirements

eN60335-2-102: 2006/a1: 2010: Household and Similar 
electrical appliances - Safety - Part 2-102: Particular 
Requirements for gas, Oil and Solid-fuel Burning appliances 
having electrical Connections

Safe use of Kerosene. These fuels give off a flammable 
vapour when heated moderately. Vapour ignites easily, burns 
intensely and may cause explosion. The vapour can follow 
along at ground level for considerable distances from open 
containers and spillages collecting as an explosive mixture in 
drains, cellars, etc.
Fuels remove natural oils and fats from the skin and this 
may cause irritation and cracking of skin. Barrier cream con-
taining lanolin is highly recommended together with good 
personal  hygiene  and  where  necessary  appropriate  personal                   
protection equipment (P.P.e.).
gas  oil  may  also  cause  irreversible  damage  to  health  on            
prolonged or repeated skin contact.
always store fuels in a properly constructed and labelled 
tank. always handle fuel in open air or well ventilated space 
away from sources of ignition and refrain from smoking.
always drain fuel using a proper fuel retriever, funnel or 
mechanical siphon. Never apply heat to a fuel tank, container 
or pipework. Never siphon fuel through tube by mouth. 
avoid inhaling fuel vapour as this can cause light headedness 
and seriously impair judgement.

Содержание silver Boilerhouse 15-20kW





































Отзывы: