Step 7 – Attach Head Assembly to Post
Unscrew 4 Small Bolts and 4 Lock Washers
pre-assembled in Head Assembly.
4 Small Bolts
.
Load Head Assembly by inserting hose into post.
.
Insert Head Assembly into post.
9 M6x10 Flat Head Screws
9 M6 Cap Nuts
Control knob should be above decal on post.
Screw on M6 Cap Nut loosely.
.
Attach Head Assembly to post, and loosely install four
small bolts and lock washers.
.
Tighten bolts securely.
.
Slide Reflector Plate
.
Screw on M6 Cap Nut
Step 8 – Install Reflector
.
Insert one M6x10
onto Reflector Panels.
loosely.
Flat Head Screw.
Note: If necessary for proper alignment of reflector
.
Repeat procedure to complete the assembly of all four
r
.
etighten after sections are align
.
ed.
sections, loosen each screw prior to further assembly and
.
Fully tighten all of the screws in the rolled edge.
Slide two Reflector
Insert
M6x10
Flat
Head
Screw.
sections.
Panels together.
6
WARNING
Remove protective cover before assemble.
4 Lock Washers
