Fire Sense 61280, Руководство пользователя

Страница: 5 / 14

Installation process Assembly time: 40 minutes
S
.
tep 1 – Attach Wheel Assembly to Base
Line up holes in Wheel Bracket with corresponding
.
Finger tighten
the
bolts.
holes in Base and insert 2 - M 8 x 1 2 B o l t s through holes.
.
Be sure that the Wheel Assembly is parallel to the
base, and fully tighten bolts
Wheel Assembly
2 M8x12 Hex Bolts
For best stability, fill the sand box with sand.
Step 2 – Attach Sand Box to Base
Additional Requirements
The following items are not included, but are necessary for
.
Philips screwdriver w/ medium blade.
the proper assembly of your heater. Do NOT attempt to
.
Adjustable opening wrench.
assemble without proper tools.
.
Leak Detection Solution (Instructions on how to make
.
Slip 4 M8 Flat Head Screws through holes of Base.
solution are included on page 8 )
Note: You must follow all steps to properly assemble
heater.
4 M8 Flat Head Screws
4 M8 Nuts
4
Picture Qty Description Used in
Step(s)
4 M6x12 Hex Bolt 4
4 M6 Flange Nut 4
8 M6x10 Round Head Screw 4
8 M5 Flange Nut 4
9 M6 Cap Nut 8
9 M6x10 Flat Head Screw 8
3 Wing Nut 9
3 Reflector Stud 6
4 Small Bolt
*Pre-inserted in Head Assembly
7
4 Lock Washer
*Pre-inserted in Head Assembly
7
4 M8 Flat Head Screw
*Pre-assembled to base with
sand box
2
6 M8 nut
*4 pcs. pre-assembled to base
with sand box
1/2
6 M8x12 Hex Bolt 1/3
13 M8 Flat Washer 3/6/9
4 L-Shaped Bracket 3
1 Plastic Ring 4
1 Plastic Fastener (optional) 5
1 Wrench As
needed
Hardware
For models with sand box pre-assembled to
the base, skip to Step 3.