manualshive.com logo in svg

Fire-Lite Alarms Fire-Watch 411UDAC, Инструкция по установке, программированию, устранению неполадок и эксплуатации

Fire-Lite Alarms Fire-Watch 411UDAC - надежная система пожарной сигнализации с множеством функций. Установка, программирование, устранение неполадок и руководство по эксплуатации описаны в руководстве по эксплуатации. Скачайте бесплатно этот руководство на manualshive.com.

Поделиться
Скачать
background image

                  Document #51073     Rev.  A   1/19/99     P/N 51073:A

13

Panel Configuration

1.7

Panel Configuration

The 411UDAC can be configured, through programming, for the following modes of operation:

•  Stand-alone Mode With Communicator Enabled - the 411UDAC functions as a latching digital alarm commu-

nicator in which all input circuit activations latch (except those programmed as autoresettable) and are 
restored only by pressing the local reset switch.  The onboard communicator will attempt to transmit events to 
a Central Station

• Slave Mode With Communicator Enabled - the 411UDAC functions as a nonlatching slave to a host control 

panel and the onboard digital alarm communicator will attempt to transmit events to a Central Station

• Slave Mode With Communicator Disabled - the 411UDAC  functions only as a nonlatching slave to a host 

control panel.  The digital alarm communicator will not transmit to a Central Station

1.8

Operational Modes

1.8.1 Normal Mode

Normal Mode is the standard mode of operation in which the 411UDAC monitors the channel/input circuits as well as 
telephone line voltage and other internal circuits.  In addition to locally annunciating system trouble, active channel/
input and communication fail, the onboard communicator transmits system status information to UL listed central 
station receivers if programmed to do so.  Transmitted data includes fire alarm, fire alarm trouble, supervisory alarm, 
AC loss and process monitoring information.  Specific digital communicator troubles are also transmitted.

1.8.2 Real Time Clock Mode

Real Time Clock Mode allows the user to change the digital alarm communicator’s internal 24 hour clock.  Connect-
ing an external Programmer allows access to the various Modes of operation.  While the 411UDAC is in Real Time 
Clock Mode, it does not monitor channel inputs.

1.8.3 Program Mode

Program Mode is used to change the programmed functions of the 411UDAC.  While the 411UDAC is in Program 
Mode, it does not monitor channel inputs.  In addition, some program items will be locked, which will prevent editing 
while the communicator is active (dialing, transmitting, etc.).

1.8.4 Troubleshoot Mode

Troubleshoot Mode may be used to sample and display status for all channel/input circuits, Notification Appliance 
Circuit, AC power, battery and 12 volt resettable power.  In addition, Troubleshoot Mode may be used for testing the 
telephone line interconnect wiring.  Connection from the 411UDAC’s modular jacks, through the RJ31X jacks and 
into the telephone network may be easily checked.  In this mode, the Programmer keypad acts similar to a telephone 
touchpad.  While the 411UDAC is in Troubleshoot Mode, it does not monitor channel inputs.  

1.8.5 Default Mode

Default Mode may be used to return all 411UDAC programming back to the factory default settings and to reset the 
Real-Time Clock to ‘00:01’ midnight.  See “Default Mode” on page 50.

Содержание Fire-Watch 411UDAC





















































































Отзывы:

Нет отзывов

Похожие инструкции для Fire-Watch 411UDAC

Ziton ZP700 Series Installation Sheet preview
ZP700 Series
Бренд: Ziton Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды