GENERAL INSTRUCTIONS
Before using the machine, instruct all operators to read the chapter “SAFETY STANDARDS” (enclosed
1).
MANUFACTURER RESPONSABILITIES
The manufacturer FIORENTINI is not responsible for any inconvenients, failures, accidents, etc. due
to the non-acquaitance (or non-fulfilment) of the prescriptions contained in this manual. The same
applies to change’s execution, modifications, and/or to the installation of accessory not preliminarly
authorized.
In particular, the firm FIORENTINI is not responsible for any damages caused by:
- natural calamity
- erroneous operations
- no maintenance
Furthermore, the MANUFACTURER is not responsible for any interventions not performed by autho-
rized personnel.
SPARE PARTS
Use only ORIGINAL SPARE PARTS, checked and authorized by the manufacturer. Do not replace the
components after they become worn by the use; replacing a component in due time allows for a better
machine operation and a saving as well, because greater damages will be avoided.
INTERVENTION REQUESTS
Possible intervention requests should be made after an accurate analysis of the inconvenients and their
causes. In any case, when calling the technician, report what follows:
- Model of the machine
- Series number
- The detail of the detected faults
- The checks executed
- The performed adjustments and their results
- Any other information considered useful for this purpose
- Address the requests to the authorized customer service
WARNING
The manufacturer can make any changes to the machine, for constructive or commercial reasons, without
being obliged to change the instruction manual at the right time according to these modifications.
GENERAL SAFETY STANDARDS
The machine described in this manual has been built according to the 89/392/CEE rule regarding the
machines and to its subsequent modifications.
The person responsible for the machine must adhere to CEE rules and to the local standards as well,
regarding the working environment for operators’ safety and health purposes. Before starting the
machine, always perform the preliminary checks. The safety standards which involve any dangers, cited
in the text of the manual, can be recognised by the symbol:
CAUTION
Beyond the standard listed hereunder, the person responsible for the machine must comply with the
rules provided by the law in force regarding personnel’s safety and health in the working stations.
Furthermore, the person responsible for the machine must instruct the operators on what follows:
- Safety and accident prevention standards
- Specific standards regarding the machines
- Position on the machine of the emergency pushbuttons or of similar mechanisms, for a prompt
operation. The fixed or movable protections (carters) should always remain in their position, correctly
fixed with perfect integrity during all procedures regarding the normal operation. If, for any reasons,
the carters are removed (protections switched off or short-circuited), their efficiency should be restored
before restarting the machine. Use the machine only under technically unexceptionable conditions and
6
