SAFETY SYSTEM
WARNING: the machine is equipped with a two safety system. Firsr is “emergency stop”, constitued
by a mushroom push-button (fig.). In emergency case, press down this button. Second is deconnecting
soket, same is used for battery charger. Before learning how to use the machine, the operator should be
familiar with the use of this safety system, to automatically use it in case of emergency. Never reset the
safety system before having solved the failure, if necessary with the help of a specialized technician.
DESCRIPTION
The UBF 38 power sweeper has been designed to perform a complete cycle of industrial and urban
cleaning. The sweeping action is carried out by one or more side brushes which convery the waste
towards the centre of the machine, where a central brush, a roller, sweeps it “into the hopper”. The dust
is suked up and controlled by a turbine. The air released into the environment is filtered by a filter. The
waste collected in the hopper may be discharge into the ground or into special boxes.
Waste Hopper
The hopper is fitted on the front of the machine and connected to the chassis by a lever. A hydraulic
cylinder lifts and overturns the hopper when the waste is to be emptied at a height. The lower part has
a hinged flap also operated by a hydraulic cylinder which closes the hopper while the waste is being
discharged. In the front part there is a turbine driven by a electric motor. The turbine creates a depression
inside the hopper and in the central brush compartment. Inside it, there is a filter each connected to filter
shaker. On the front right side there is a side brush whose rotary movement is operated by a hydraulic
cylinder, while its rise and descent is operated by screw-jack.
PRELIMINARY OPERATIONS
After receiving the machine, remove the packing paying attention not to damage it. It can be used for
future long transport of the machine. Immediately check the machine condition and, in case of damages
due to transport, inform the carrier. Before operating the machine, carefully read the instructions
contained in this booklet, especially those concerning the safety standards.
USE OF THE MACHINE
CAUTION
FIG. 4
FIG. 5
11
