Finn HydroSeeder T280, Руководство по эксплуатации и каталог запасных частей

Страница: 10 / 84

OPERATION AND MAINTENANCE
MANUAL FOR
FINN T280 &T330 HYDROSEEDERS®
This manual gives you step-by-step instructions for the operation and maintenance of the Finn HydroSeeder®.
For best results and to insure longer life of the equipment, please follow these instructions carefully. For your
safety read the entire manual before operating this unit.
DEFINITION OF HYDROSEEDING:
Hydroseeding is the process whereby seed, fertilizer and/or lime and wood fiber mulch (using water as a carry-
ing medium) are applied on the soil to establish vegetation.
THE FINN HYDROSEEDER® AND HOW IT WORKS:
The Finn HydroSeeder® will apply seed, fertilizer and/or lime, wood fiber mulch, or stabilizing materials in
any prescribed or desired combination. The materials placed in the HydroSeeder® slurry-tank are mixed with
water and kept in suspension by a dual agitation process, recirculation of slurry and mechanical agitation, thus
forming a slurry that is pumped to the discharge assembly and directed onto the seed bed by the operator. This
equipment is designed to accomplish hydroseeding in one easy operation with maximum efficiency.
MOUNTING THE HYDROSEEDER®:
For speed and mobility of operation, the HydroSeeder® should be mounted on a truck or trailer, however, it is
important to select a carrier with sufficient capacity to handle the added weight.
DIMENSIONS, CAPACITIES, & TRUCK REQUIREMENTS:
* CF Back of cab to end of frame
C Distance from HydroSeeder® front to center of gravity
* CA Back of cab to center of rear axle or trunnion on
tandem
* F Front axle weight – Empty
* FL Front axle weight – Loaded
G Distance from center of bogie to HydroSeeder® center
of gravity
HW HydroSeeder® weight
*
RE
Rear axle weight – Empty
* RL Rear axle weight – Loaded
* WB Truck wheel base
* These dimensions needed from the truck supplier as
well as front axle capacity and rear axle capacity.
** Truck GVW depends on the truck weight. CA dimen-
sions are approximate only, and depend on the front and
rear axle capacities, as well as the front and rear empty axle weights.
***Weight of HydroSeeder®, water, and full charge of granular solids only. No auxiliary equipment or loads included.
6
TITAN280
English (Metric)
Truck GVW **
CA **
C (loaded)
C (empty)
OAL
HW (empty)
HW (water only)
HW (full load) ***
49,600 lbs.
120 in.
82 in.
122 in.
209 in.
11,690 lbs.
34,790 lbs.
38,350 lbs.
(22,320 kg.)
(304+ cm.)
(208 cm.)
(309+ cm.)
(530+ cm.)
(5,300 kg.)
(15,780 kg.)
(17,390 kg.)
TITAN330
English (Metric)
61,000 lbs.
157 in.
100 in.
134 in.
250 in.
12,340 lbs.
40,480 lbs.
44,750 lbs.
(27,669 kg.)
(398+ cm.)
(254 cm.)
(340+ cm.)
(635+ cm.)
(5,600 kg.)
(18,361 kg.)
(20,300 kg.)