Finn HydroSeeder T280, Руководство по эксплуатации и каталог запасных частей

Страница: 18 / 84

Figure 11 - Main Menu
Figure 12 - Access Stored Fault Codes
Figure 13 - Stored Fault Codes
Stored Fault Codes
The PowerView Display will store any fault codes
generated by the engine and display them along with
a text description. To access these fault codes:
1. Touch the Menu Key to display the Main Menu.
2. Using the Right Arrow Key, toggle down the list
until "Stored Fault Codes" is highlighted. See
Figure 11.
3. Touch the Enter Key to view any stored fault
codes. The display will respond by presenting a
"Requesting Fault Codes" message while the sys-
tem retrieves the codes. See Figure 12.
4. Once the stored fault codes have been retrieved,
the initial code will be displayed along with a
text description. See Figure 13.
5. If the word "MORE" appears at the bottom of the
display, this indicates that there are additional
fault codes being stored. Use the Right Arrow
key to advance to the next code.
6. As long as the arrow appears to the right of the
word "MORE" as you advance through the fault
codes, this means there are more codes available
for viewing. When the arrow shifts to the left of
the word "MORE", this is an indication that you
have accessed the final fault code being stored.
At this point you can touch the Left Arrow Key to
review the fault codes or touch the the Menu Key
to return to the Main Menu.
AREA COVERAGE - MATERIAL CAPACITY:
To determine the coverage per load for any HydroSeeder
®
, three questions must be answered prior to the applica-
tion. First, is the job to be done “one step” (which is when the seed, fertilizer and mulch are applied proportion-
ally per load) or “two step” (which is when the seed and fertilizer are applied alone and then covered by mulch as
a second operation)? Second, at what rates (usually in pounds per 1,000 square feet, or pounds per acre) are the
seeding materials to be applied? Finally, what are the loading capacities of the HydroSeeder
®
?
14
GO TO 4-UP DISPLAY
ENGINE CONFGURATION
STORED FAULT CODES
ADJUST BACKLIGHT
ADJUST CONTRAST
SELECT UNITS
SETUP 1-UP DISPLAY
ENTER
KEY
ENTER
KEY
REQUESTING
FAULT CODES
SHUTDOWN
WARNING
SPN110 FMI10
HIGH COOLANT TEMP
MORE HIDE
MORE
MORE
This Means There Are
More Stored Fault Codes
This Means There Are No
More Stored Fault Codes
MENU
KEY
TO REVIEW STORED
FAULT CODES