Finn HydroSeeder T170 MB, Инструкция оператора и каталог запасных частей

Страница: 26 / 106

20
FAULT CODES (CONTINUED)
STORED FAULT CODES
The control unit allows the operator to request any stored fault codes that may be contained in
the engine ECU. To view stored faults select the “Fault Codes” menu selection from the main
menu. The control system will send a request to the engine ECU for any faults that the ECU may
have stored. Should any faults exist, the control unit will display a list of the active and stored
faults. The list will show if the fault is Active, Stored or both. The list will contain the engine
manufacturer specific Fault Code (if available) for the fault condition. To view more detailed
information about any of the fault conditions listed, navigate to the desired fault condition and
select the “ ” softkey. A more detailed description of the fault will be presented along with the
current Status.
MAINTENANCE TIMER
The control system provides an engine maintenance timer feature. The maintenance timer is a
countdown timer and indicates the amount of engine runtime remaining until maintenance is due.
The maintenance timer is configurable and resettable by the operator. If the system is powered
but the engine is not running maintenance hours will not be accumulated.
Note: Setting the timer to 0 will disable the maintenance timer operation.
The Maintenance Timer is factory-set to 250 hours.
MAINTENANCE TIMER ALERT
When the maintenance timer expires the system will activate an “Engine Maintenance Due” alert
popup window. If the maintenance due alert is acknowledged but the timer is not reset the alert
popup will re-initiate for each key “ON” cycle.
ACKNOWLEDGING MAINTENANCE TIMER
Acknowledge the maintenance alert by selecting the acknowledge
“ ” softkey.