FingerTec H2i Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

background image

17

CONTENTS

NOTE

We highly recommend you to contact

[email protected]

for this operation

Using USB to Download Data

The USB flash disk feafure is useful in cases where the terminal is installed far from a
PC or there is a connection problem. To determine the type of USB compatible with
the terminal, please refer to this link at

fingertec.com/newsletter/HL_74.html

.

USING USB FLASH DISK (PEN DRIVE)

USB flash disk can be used in the H2i for these operations:

• Downloading/uploading user information (user ID, fingerprints, cards etc)

• Downloading transaction logs

• Updating firmware

The H2i comes with a USB extension. This extension is intended for security purpose,
for without it, no USB flash disk can be inserted into the terminal to access its data.
To carry out any of the above operations, you must first plug the USB extension into
the port in the terminal and then insert the USB flash disk into the other end of the
extension. Listen to the command from the terminal. The terminal will name each
operation in sequence as shown below. You need to wave administrator card at the
induction area to confirm the relevant command.

1. To download transaction logs from terminal to USB flash disk

Green LED blinks >

“Download transaction logs”. Please wave your adminis-

trator card for confirmation > Wave administrator card at the card induction area
to confirm >

“The operation is successful”

2. To download users from terminal into USB flash disk

Green LED blinks >

“Download users”. Please wave your administrator card

for confirmation > Wave administrator card at the card induction area to confirm
>

“The operation is successful”

3. To upload users from USB flash disk into termina

l

Green LED blinks >

“Upload users”. Please wave your administrator card for

confirmation. Wave administrator card at the card induction area to confirm >

“The operation is successful”

4. To upload firmware from USB flash disk into terminal

Green LED blinks >

“Upload firmware”. Please wave your administrator card

for confirmation > Wave administrator card at the card induction area to confirm
>

“The operation is successful”

«
...
15
16
17
18
19
...
»

Содержание H2i

























Отзывы:

Нет отзывов

Похожие инструкции для H2i

Бренд: Microchip Technology Страницы: 37

Бренд: Federal Signal Corporation Страницы: 79

Бренд: Federal Signal Corporation Страницы: 32

Бренд: Uclear Страницы: 40

Бренд: OJ Electronics Страницы: 8

Бренд: OJ Electronics Страницы: 112

Бренд: OJ Страницы: 17

Бренд: Zaiput Flow Technologies Страницы: 10

Бренд: IBM Страницы: 214

Бренд: Netro Страницы: 14

Бренд: VMK Страницы: 98

Lift Inverter L1000V

Бренд: YASKAWA Страницы: 282

Бренд: LEGRAND Страницы: 10

Бренд: zeeltronic Страницы: 13

Бренд: QD Dynamics Страницы: 64

Alicat Scientific MC

Бренд: Halma Страницы: 2

Бренд: Curtis Страницы: 30

Бренд: meibes Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды