15
14
4-2. Dual Display RPM
T his f unct ion i s avai lable f or t he
primary functions ; DC mV, AC mV, DC
V , A C V, Dwell, ms-Pulse, and Duty
Cycle. The trigger level selection is not
available for this function, but available
f or the primary display RPM function.
See 4-8 for more details.
1.
Set the meter to the corresponding
primary function.
2.
Press
butt on t o t oggl e
bet ween RP M (f or 4-strok e
engine) and RPM (for 2-stroke or
DIS engine).
3.
Insert the Dual Banana Connector
int o the RPM – and the RPM +
input terminals as shown. Ensure
the plug with the Ground Tab goes
into the RPM – terminal.
4.
Clamp the inductive pi ckup t o a
spark plug wire with the arrow sign
facing the spark plug as shown.
Ens ure the pic kup jaws ar e
completely closed.
4-3. Temperature
1. Set rotary selector to T e m p .
position.
2. Pres s menukey 3(or 4) t o select
temperature function. The primary
displ ay wi ll show
and t he
secondary display will always show
the meter’s internal temperature in
C or F alternatively matching with
the selected primary display mode
of C or F.
3. Ins ert banana plug K- ty pe
temperat ure bead probe w it h
correct + / - polarities. You can also
use a thermocouple probe adapter
(optional accessory) to adapt other
st andard K-t y pe t emperat ure
probes.
4. Touch the end of the thermocouple
probe to the measurement surface
and read the primary digital display
wit h C (or F). We c an eas ily
recognize t he temperat ure unit of
the pri mary dis play from t he
secondary display.
NOTE: The measured temperatur e
is displ ayed with 0. 1 C (or
0.1 F) resolution. For example,
98 C is displayed as
and 98 F is displayed
.
5.
Read RPM in the secondary display.
NOTE: Position the pickup as far away from the distributor and the exhaust
manifold as possible.
Position the pickup within 6 inches of the spark plug or move it to
another plug wire if no reading or an erratic reading is received.
