Fimap MAXIMA 2017 PLUS, Руководство по эксплуатации и обслуживанию

Страница: 22 / 40

EMERGENCY SWITCH
This machine is equipped with an emergency switch. To activate it, just
press the button (1) on the back of the control handlebars ( Fig. 1 ).
WARNING : this control interrupts the electrical circuit between
the batteries and the machine system.
NB : after stopping and resolving the problem, turn the key to “0”,
set the button (1) to the standard position and turn the key to “I”
to resume the work.
TUTORIAL
The machine function board contains a memory card with lessons that explain:
• the first machine start-up.
• routine maintenance to be carried out on the machine.
• the machine use and maintenance manual.
To activate them, proceed as follows.
1. With the machine on, press the menu button (1) on the working screen (
Fig. 1
).
2. Press the TUTORIAL button (2) ( Fig. 2 ).
NB : to return to the working screen, press on any point of the screen (except the edges of the
display) or else wait three seconds without touching anything.
3. On the tutorial screen ( Fig. 3 ), select the topics you want to study:
A. Using the machine.
B. Daily maintenance.
C. Extraordinary maintenance.
NB : select the “USING THE MACHINE” key (A) to see the video explaining the stages for
preparing the machine for work ( Fig. 3 ).
NB : select the “DAILY MAINTENANCE” key (B) to see the video explaining the maintenance to
be carried out every day ( Fig. 3 ). When this button is selected, the screen regarding the
selection of the videos to view will be displayed ( Fig. 4 ). You can view the following tutorial
videos:
• Draining and cleaning the recovery tank.
• Cleaning the vacuum tube and squeegee body.
• Cleaning the vacuum motor filter.
• Draining and cleaning the solution tank and water system filter.
NB : select the “EXTRAORDINARY MAINTENANCE” key (C) to see the video explaining the
maintenance to be carried out daily ( Fig. 3 ). When this button is selected, the screen regarding
the selection of the videos to view will be displayed ( Fig. 4 ). You can view the following tutorial
videos:
• Replacing the squeegee rubber blades.
• Replacing the brush head brushes.
• Adjusting the squeegee rubber blades.
SOLUTION TANK OVERFLOW
The machine is equipped with a mechanical device (float) under the recovery tank lid that, when the
recovery tank is full, shuts off the air to the vacuum motor intake to protect it; the sound of the vacuum
motor will then be deeper.
If this is the case, proceed as follows:
1. From the DS control panel, select TRANSFER mode (A) ( Fig. 1 ).
2. Bring the machine to the designated place for emptying the recovery tank.
3. Switch off the machine by making a quarter turn to the left with the key (1) of the main switch
(
Fig. 2
).
4. Empty the recovery tank (see “ EMPTYING THE RECOVERY TANK ”).
NB : the machine will only resume correct operation after the next start-up.
ALARM SCREEN
When an error occurs, the symbol (1) is displayed in the information field ( Fig. 1 ). It remains visible
until the error has been resolved.
The “ERROR” window will also be superimposed on the screen ( Fig. 2 ). It shows the alarm number,
the membership group, and a brief description.
When an error occurs, proceed as follows:
1. Stop the machine and press the button (2) ( Fig. 2 ).
2. If the error persists, switch off the machine and wait at least ten seconds before switching it back
on.
NB : to close the error screen, press the button (3) ( Fig. 2 ).
3. If the error persists, contact your nearest service centre.
NB : the symbol (1) ( Fig. 1 ) remains visible until the error has been resolved.
NB : if the machine is fitted with the FFM (FIMAP FLEET MANAGEMENT) system, it will send
an e-mail to the affiliated service centre.
At the end of the work, and before carrying out any type of maintenance, perform the following
operations:
1. From the DS control panel, select TRANSFER mode (A) ( Fig. 1 ).
2. When you push the dead man's lever (1) ( Fig. 2 ), the machine will begin to move.
3. Take the appliance to the dedicated dirty water drainage area.
4. Switch off the machine by turning the key (2) of the main switch to the left ( Fig. 3 ). Remove the
key from the instrument panel.
5. Carry out all the procedures listed in “RECOMMENDED PERIODIC MAINTENANCE” (in the “AT
THE END OF THE WORK” column).
6. Insert the key (2) in the main switch on the control panel. Set the main switch to “I”, turning the
key (2) to the left ( Fig. 4 ).
7. When you push the dead man's lever (1) ( Fig. 2 ), the machine will begin to move.
8. Take the appliance to the designated machine storage place.
ATTENTION : park the machine in an enclosed place, on a flat surface, and at a safe distance
from any objects that could either damage it or be damaged due to contact with the machine
itself.
9. Make sure the machine is in a safe condition (see “ MACHINE SAFETY MEASURES ”).
AT THE END OF THE WORK
22
1
3
OFFICE
0000.00 100%
ECO mode
0000.00 100%
1
2
2
1
VIDEO TUTORIAL
Utilizzo della macchina
Manutenzione giornaliera
Interventi straordinari
Back
3 4
C
B
A
Back
0000.00 100%
1
A
2
2
OFFICE
0000.00 100%
ECO mode
0000.00 100%
Italiano
English
Spanish
French
German
Allarme 1
Gruppo
Descrizione
Reset
?
1 2
1
2
3
4
Back
0000.00 100%
1
A
3 4
2 2
2
1