ADJUSTMENT
AND
INSPECTION
MAGNA 65-70-75-83
Doc. 10004978
Issued 27/03/2008
Rev. 00
P a g .
9 d i 19
7.
At the end press OUT and confirm ENTER if some parameter has been changed.
ATTENTION: PLEASE DO NOT CHANGE ANY PARAMETERS RELATED TO THE SAFETY
USE CONDITION OF THE MACHINE LIKE THE ONCE RELATED TO ACCELERATION,
BREAKING,. ECC. ONLY THE DIFFERENT SPEED VALUES CAN BE MODIFIED (CUTBACK
SPEED 1 – 2 and MAX SPEED FORWARD)
IN CASE OF LOSS OF DATA:
To set automatically the right values of all the parameters please
find out the menu "RESTORE PARAM." by using the ROLL button
* SELECT MENU *
4 - RESTORE
1.
Press ENTER
2.
SELECT the program Mod. 03 (or the memory where the list has
been stored with the SAVE program). Use the ROLL button to run
through)
SELECT PROGRAM:
Mod. 03
3.
Press ENTER to confirm the restore operation
4.
Answer to the question “ARE YOU SURE?” by pressing ENTER to
confirm the operation (OUT to cancel and exit)
ARE YOU SURE?
YES=ENTER NO=OUT
5.
Press ENTER to confirm the restoring operation
6.
Wait until the message WAIT stands still written on the display
WAIT!
7.
When all the parameters are refreshed and updated the heading
specified on the left appears on the display:
SELECT MENU
RESTORE
