ADJUSTMENT
AND
INSPECTION
MAGNA 65-70-75-83
Doc. 10004978
Issued 27/03/2008
Rev. 00
P a g .
1 3 d i 19
Functional inspection electric layout
1.
Remove the battery connector
2.
Verify the cleanliness and the tightening of the power cable
connections. . (on power switches, fuses, motors, batteries, ecc.)
3.
Re-connect the battery connector
4.
Check the signal lamps and switches:
-
check forward and backward movement, speed reductions,
acceleration and braking
-
check functionality manipulators up - down brushes base
and squeegee
-
check signal lamp up – down brushes base
-
check switch with signal lamp and brushes motor (running
with the machine)
-
check switch with signal lamp and solenoid valve (running
with the machine)
-
check switch with signal lamp and suction motor
-
check the efficiency of the floating tap on the recovery tank:
with the suction motor working and with the tank full the
tap has to close the aspiration.
-
check operation AUT-MAN relative to the working of the
squeegee
-
check the parking brake (lamp and efficiency)
-
check operation of the hourmeter
-
check operation of the horn
-
check the operation of the backward alarm
Adjusting bending speed reduction microswitch
1.
On the crown of the front wheel is present one
support
and a
microswitch
for the regulation of the speed in curve. You must
regulate the microswitch in way that the micro is pressed in
forward or reverse gear (always leaving a small game) and when
turn right or left the micro is opened.
