ADJUSTMENT
AND
INSPECTION
MAGNA 85 – 100 BS
Doc.
Issued 12/2006
Rev. 00
Pag.
17 di 18
3.
Grease the
supports pin
on the arms of the brush head.
4.
Check the oil level inside the gear box of the brush assembly
5.
Check the cleanliness of the slots on the
brush motor
.
6.
Check the wear of the carbon brush .
Final Inspection
Final inspection
11
manipulators (drive selection, up/down, brush
ehad side movement)
Check the functionality of :
1.
Squeegee up/down
12
Horn
2.
Side movement of the brush head
13
Fill the recovery and solution tank and check the
no leaking condition on the hose connections
3.
Vacuum motor
14
Check to have the good quantity of water on
falling on the floor
4.
Solenoid valve
15
The correct adjustment of the squeegee
5.
Brush motor
16
Check the brush pressure and the correct brush
head adjustment
6.
Automatic function
17
Adjust the splash guards
7.
Parking brake
18
Check the automatic control of the squeegee
and vac motor
