ADJUSTMENT
AND
INSPECTION
MAGNA 85 – 100 BS
Doc.
Issued 12/2006
Rev. 00
Pag.
10 di 18
Acquiring accelerator pedal travel
Console Display
1.
Use ROLL to select:
* SELECT MENU *
6- PROGRAM VACC
2.
Press ENTER to display:
FORW BACK
4.99 4.99
3.
Press ENTER to zero the values:
FORW BACK
0.0 0.0
3.
Engage the 3
rd
forward gear and slowly press the pedal all the way
down without stopping and values of the following type will
appear:
FORW BACK
4.84 0.0
4.
Repeat the procedure with reverse gear:
FORW BACK
4.84 4.84
5.
Press ENTER to display:
ARE YOU
SURE?
6.
Press ENTER to confirm and go back to the initial heading:
* SELECT MENU *
6- PROGRAM VACC
Tester
1.
WARNING: make sure the front wheel is lifted on the safety
stand.
2.
Use ROLL to select:
* SELECT MENU *
2- TESTER
3.
Press ENTER and various parameters of the following types
appear:
VMN
VMN > 30%
4.
Use ROLL to select:
BATTERY
VOLT=36 36V
5.
Use ROLL to select:
MOTOR VOLTAGE
VOLT = 00.0
6.
Engage forward gear and 3
rd
gear and the following will appear:
MOTOR VOLTAGE
VOLT = 26
7.
Select 2
nd
gear and rotate the wheel at maximum speed and the
following will appear:
MOTOR VOLTAGE
VOLT = 21 - 22
(or similar values)
