19
UPON COMPLETION OF WORK
At the end of the work day, before performing any type of maintenance:
-
Close cock (3)
-
Raise base (1)
-
Raise squeegee (2)
-
Turn off brush switch (1)
-
Turn off aspiration motor switch (2)
-
Move the machine to the water disposal point
-
Turn the key (3) to turn the machine off
-
Engage the parking brake
-
Lift hood (1) and keep it lifted by rotating support (2) backwards. This frees recovery
tank drain tube (3)
-
Remove the drain tube from its scat, unscrew the drain plug and empty the recovery
tank
-
The squeegee should be raised when the machine is not in use to prevent permanent
distortion of the rubber strips
WARNING! This operation must be performed using gloves to
protect themselves from contact with dangerous solutions.
-
Remove the brushes and clean them with a jet of water (see "BRUSH REMOVAL" pg.
22)
WARNING! Use gloves to avoid injury to the hands.
WARNING! Use gloves to protect themselves from contact with
dangerous solutions.
