15
MACHINE PREPARATION
12.
RECOVERY TANK
-
Open hood (1) and block it in its high position with support (2).
Check:
-
that plug (5) is properly anchored
-
that aspiration tube is inserted in its seat
WARNING! Always use low foam detergent. To avoid the
production of foam is recommended to introduce into the
recovery tank a small amount of foam agent before starting work.
13.
SOLUTION TANK
Fill the solution tank with clean water at a temperature not in excess of 50·C. Add liquid
detergent in the amounts and using the procedures recommended by the detergent
manufacturer. Use only a minimal percentage of detergent to prevent formation of an
excess quantity of foam since too much foam may damage the aspiration motor.
WARNING! Always use low foam detergent. To avoid the
production of foam is recommended to introduce into the
recovery tank a small amount of foam agent before starting work.
WARNING! Never use pure acids.
WARNING! Use gloves to protect themselves from contact with
dangerous solutions.
