background image

6

Combi drum 35 (pump)

1.  What's included

• 

PP basin

• 

PP drum with brushes

• 

70 micron stainless steel panel

• 

PP duct

• 

Water level meter with 3 pins

• 

Drum motor

• 

Submersible pump

• 

Spray tube with 4 sprayers (the first of which has a higher 
flow)

• 

2x 63 mm inlets

• 

3x 110 mm outlets

• 

3x 110 mm drum bypasses

• 

2x 1 1/2" drain with ball valve

• 

Control box

• 

Cover with safety lock

• 

100 L Bio wheels

2. Product description

The drum filter consists of a PP basin containing a PP drum with 
mesh.  The  drum  is  pump-fed  and  installed  beside  the  pond. 
The inlets are below the water surface level, and the dirty water 
is pump-fed through the floor drains or skimmers into the first 
filtration chamber. On the outflow side, the water flows through 
a slotted plate into the moving bed. Because the dirty water 
flows through the drum, contaminants in the water cling to the 
interior of the drum. As a result, less water can flow through the 
mesh and the water level on the inside of the drum rises. The 
water level meter detects this and initiates the flush cycle. This 
cycle consists of activating the drum motor and spray pump. 
This causes the drum to turn slightly more than one full rotation 
and  the  sprayers  flush  the  mesh  clean.  The  flush  water  then 
flows into the sewage along with the waste. The cycle repeats 
as often as necessary. 

3. Assembling the filter

The  housing  of  the  filter  consists  of  a  PP  basin  with  one 
partition. The partition is fitted with a silicone sealing strip at 
the  flange  which  separates  dirty  water  from  clean.  There  are 
also 3 holes in the partition which are covered with a cap. In 
case  of  a  breakdown  in  the  drum  control,  the  covers  can  be 
removed to enable the water to bypass the drum and flow past 
it  without  being  filtered.  This  enables  you  to  still  use  the 
biological filtration segment.

The basin is fitted with a removable waste drain. This can be 
removed  from  the  interior  of  the  drum,  which  saves  you  the 
trouble of having to disassemble the drainage line. The inclined 
surface  accelerates  the  water  flow,  causing  the  waste  to  be 
carried  along  with  it  into  the  drain.  There  are  also  4  brushes 
installed  on  the  inside  of  the  drum  which  sweep  away  any 
algae or other coarse particles that cling to the drain. The drum 
filter is fitted with a removable spray tube made of PP, which 
is equipped with flat jet nozzles. The sprayers feature a quick-
release system, making them easy to remove for cleaning. The 
water level meter in the basin consists of 3 electrodes, 1 flush 
level, 2 high-level safeties and 1 common electrode. The water 
level for initiating the flush cycle is adjustable. Inside the basin 
is a high-pressure submersible pump which supplies water to 
the sprayers under high pressure during the flush cycle. 

The drum motor is installed in a water-proof compartment inside 
the  biological  filtration  section.  The  shaft  is  enclosed  by  a 
retaining  ring  in  the  installation  plate.  The  shaft  connects  to 
the drum via a flange with a pipe. To remove the drum, you can 
simply detach this pipe-shaft connection, after which the drum 
can be taken out. You do not have to disassemble the motor to 
do this. The screens can be removed by detaching the tension 
straps and unscrewing the cover panel to remove it.

4. Instructions for use

The  Filtreco  combi  drum  filter  and  all  parts  and  accessories 
that it comes with may only be used as follows:

• 

for cleaning garden ponds

• 

according to the user manual and technical specifications 

• 

only with water temperatures b4 ˚C and +35 ˚C. 

• 

only suitable for transporting water

• 

not for commercial or industrial purposes

• 

not suitable for salt water

• 

never use without running water

• 

never  use  in  combination  with  chemicals,  foods  or 
flammable/explosive liquids

Содержание Drum 35

















Отзывы: