Page 3
Translation of the original instructions with installation instructions Pi 370 / Pi 3700, Filtration Group GmbH, 28.06.2020, Mat. No. 72412144, Version 06
2.4 Other symbols used
Danger: High voltage!
Danger information about explosion
protection
Information about environmental protection
Protective clothing must be worn!
Eye protection must be worn!
Respirator must be worn!
Hand symbol:
Indicates general information and
recommendations
•
Bullet:
Indicates the order in which
actions are to be carried out
Arrow:
Indicates responses to actions
3
Glossary
Initial differential pressure
Differential pressure at the start of the filtration process
(when the filter element is “clean”).
Differential pressure (∆p)
Pressure difference between the dirty side and the clean
side.
Filter element
Cylindrical support structure with star-pleated filter material.
The substance to be filtered flows from the outside to the
inside. Solids are retained on the outer surface of the filter
element.
Filtrate
Fluid that is filtered.
Cooling lubricant
Cooling lubricant according to DIN 51385.
4
General information
4.1 Manufacturer
Filtration Group GmbH
Schleifbachweg 45
D-74613 Öhringen
Phone +49 7941 6466-0
Fax +49 7941 6466-429
industrial.filtrationgroup.com
4.2 Information about the original instructions
FG Mat. No.: ........................................................ 72412144
Date: ................................................................. 28.06.2020
Version: .......................................................................... 06
4.3 Negative declaration
Our fluid filtration and automatic filter products are
designed for Group 2 fluids (not dangerous) as standard as
defined by the EC Pressure Equipment Directive
2014/68/EU Article 13 and Article 4 (3), in other words a
name-plate without a CE marking is affixed to these
products. No declaration of conformity may be issued for
this reason.
According to the criteria laid down in Article 2 of the
Machinery Directive 2006/42/EC, our standard hydraulic
filters are outside the scope of this directive. Under legal
provisions, therefore, we are not allowed to affix a CE
marking, nor are we permitted to issue a declaration of
incorporation or conformity.
According to the type approval, these filters may be used in
marine applications for filtering fuels, lubricants and
hydraulic oil.
Acceptance under SOLAS is possible at any time following
the notification of the specific regulation.
