Filtration Group Pi 210 Series, Руководство пользователя

Страница: 68 / 88

Duplex Filter Pi 370 up to NG 450 6
8. Technical specifications
Design: line mounting filter
Operating pressure:
Pi 3705 - Pi 3711 10^7 load changes 250 bar (3620
psi)
10^6 load changes 315 bar (4570
psi)
Pi 3715 - Pi 3745 2x 10^6 load changes 210 bar
(3040 psi)
Test pressure:
Pi 3705 - Pi 3711 450 bar (6520 psi)
Pi 3715 - Pi 3745 300 bar (4350 psi)
Pi 3705 - Pi 3745 when use on
ships operating/test pressure 200/260 bar (2900/3770 psi)
Temperature range: -10 °C to +120 °C
(other temperature ranges on request)
Bypass opening pressure: ∆
p 7 bar
±
10 %
Filter head material: GGG
Filter bowl material: St
Sealing material: NBR/PTFE
Activating pressure of optic-
al/electrical differential pressure
indicator
∆
p 5 bar
± 1
0 %
Electrical data of contamination indicator:
Maximum voltage: 250 V AC/200 V DC
Maximum current on contact: 1 A
Inrush current: 70 W
Type of protection: IP 65 when inserted
and secured
Contact: bistable
Cable connection: M20x1.5
The switching function can be changed by turning the electric upper
part by 180° (normally closed contact or normally open contact). The
state on delivery is a normally closed contact. The use of quench-
ing circuits must be checked in the case of inductivity in the DC cur-
rent circuit. The contamination indicator data sheet contains further
information and additional contamination indicator versions.
-
We draw attention to the fact that all values indicated are average
values which do not always occur in specific cases of application.
Our products are continually being further developed. Values, di-
mensions and weights can change as a result of this. Our special-
ized department will be pleased to offer you advice.
-
We recommend you to contact us concerning applications of our fil-
ters in areas governed by the EU Directive 94/9 EC (ATEX 95). The
standard version can be used for liquids based on mineral oil (cor-
responding to the fluids in Group 2 of Directive 97/23 EC Article 9).
If you consider to use other fluids please contact us for additional
support.
*1 Pi 3730-Pi 3745 with drain screw G¼ DIN 910
9. Dimensions
All dimensions except "C" in mm.
Type A B C* D E F
Weight
[kg]
Pi 3705 78 38 G1 219 271 80 11.0
Pi 3708 78 38 G1 294 346 80 12.0
Pi 3711 78 38 G1 370 422 80 15.0
Pi 3715 78 50 G1½ 302 354 110 31.5
Pi 3730 78 50 G1½ 427 479 110 37.0
Pi 3745 78 50 G1½ 543 595 110 41.5
* SAE flange connection on request.
LEER
Subject to technical alteration without prior notice.
Type
G
SW H I J K L M N O P R S T U
Weight
[kg]
Pi 3705 27 65 144 45 182 M8x15 55 90 45 100 86 - - - 11.0
Pi 3708 27 65 144 45 182 M8x15 55 90 45 100 86 - - - 12.0
Pi 3711 27 65 144 45 182 M8x15 55 90 45 100 86 - - - 15.0
Pi 3715 30 110 175 70 280 M12x18 62 140 45 210 136 - - - 31.5
Pi 3730 30 110 175 70 280 M12x18 62 140 45 210 136 - - - 37.0
Pi 3745 30 110 175 70 280 M12x18 62 140 45 210 136 35.7 69.85 M12x20 41.5