FilterSense DynaCHARGE PM 1 PRO-A, Инструкция по установке и эксплуатации

Страница: 8 / 36

PM 1 Installation and Operating Manual v1.2
8
FilterSense © 2016
2 Introduction
2.1 PM 1 Overview
a single-point/basic functionality particulate monitor employing charge induction
sensing for reliable continuous monitoring of particulate in stacks, ducts, and pipes. Applications include filter
leak detection, cyclone overflow, and powder flow/no flow. The PM 1 is available in two versions.
PM 1

PM 1-A
o
Basic Particulate Monitor with Alarm
Relay Outputs
o
Integral Electronics Only

PM 1-T
o
Basic Particulate 4-20mA Transmitter
o
Integral Electronics Only
The PM 1 is also available in a PRO version for demanding process control and EPA compliance applications.
Refer to separate manual for the PM 1 PRO.
PM 1 PRO

PM 1 PRO-A
o
Advanced, High-Performance Parti-
culate Monitor with Alarm Relay
Output
o
Integral or Remote Electronics
o
Graphical Display/Keypad

PM 1 PRO-AT
o
Advanced, High-Performance Parti-
culate Monitor with Alarm Relay
Outputs and Analog Output
o
Integral or Remote Electronics
o
Graphical Display/Keypad

PM 1 PRO-T
o
Advanced, High-Performance Parti-
culate 4-20mA Transmitter
o
Integral or Remote Electronics
o
Graphical Display/Keypad