manualshive.com logo in svg

Filtec ft-70, Руководство по эксплуатации

Поделиться
Скачать
Filtec ft-70 Скачать руководство пользователя страница 16

 

Chapter 1: FT-70/75 System Overview

 

 

 

 

 

Inspection System Description

 

This manual provides operator’s information about the bottle and 
can versions of the FT-70 and FT-75 Inspection Systems. Unless 
specifically indicted otherwise, this manual refers to both versions 
of the FT-70 and FT-75 (FT-70/75).

•

The FT-70 provides high speed overfill or underfill (not 
concurrent) fill level container inspection. 

•

The FT-75 provides high speed concurrent overfill and 
underfill fill level container inspection. 

Additional inspection options, such as Missing Cap Detection, 
Missing Label Detection, and Smashed Bottle Detection, may be 
added to the FT-70/75 to enhance its functionality. For more infor-
mation see “Optional System Features” on page 1-6.

 

Figure 1-1.  

 

The FT-70/75 Fill Level Inspector.

Industrial Dynamics Company, Ltd. Document 40274-0600

 

                                                                               

1-3

Содержание ft-70






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды